To Temporarily Cancel The Cruise Control; To Turn Off The Cruise Control - Subaru FORESTER Manual

At this time, the cruise control set indicator
light on the combination meter will illumi-
nate.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways:
. Push the "CANCEL" button.
. Depress the brake pedal.
. Depress the clutch pedal (MT vehi-
cles).
. Shift the selector lever into the "N"
position (AT vehicles).
. Shift the shift lever into the neutral
position (MT vehicles).
The cruise control set indicator light on the
combination meter turns off when the
cruise control is canceled.
Starting and operating
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 32 km/h (20
mph) or more, push the "RES/ACC" button
to return to the original cruising speed
automatically.
The cruise control set indicator light on the
combination meter will automatically illu-
minate at this time.
& To turn off the cruise control
There are two ways to turn off the cruise
control:
. Push the "CRUISE" main switch button
again.
. Turn the ignition switch to the "Acc" or
"LOCK" position (but only when the
vehicle is completely stopped).
– CONTINUED –
7-39