Subaru 2006 Baja Owner's Manual page 102

Keys and doors
3. Perform the following steps within 45 seconds.
UB2209BA
200813
Transmitter circuit board
1) Open and close the driver's door once.
To register a new transmitter with the keyless entry
system, it is necessary to program the transmitter's
code (identification number) into the system. A label
showing the code is affixed to the bag containing the
transmitter, and another is affixed to the circuit board
inside the transmitter. If there is no bag, open the
transmitter case and make a note of the eight-digit
number. Program the number into the system in ac-
cordance with the following procedure:
1. Firmly close the doors.
2. Open the driver's door, sit on the driver's seat, and
close the door.
– CONTINUED –
2-13