Subaru 2006 Baja Owner's Manual page 33

Seat, seatbelt and SRS airbags
LO
HI
1
1) Indicator light
To turn on the seat heater, push the "LO" or "HI" posi-
tion on the switch, as desired, depending on the tem-
perature. Selecting the "HI" position will make the seat
to heat up quickly.
LO: Normal heating
HI: Rapid heating
The indicator located on the switch comes on when
the seat heater is in operation. When the vehicle's in-
terior is warmed enough or before you leave the vehi-
cle, be sure to turn the switch off.
1-8
There is a possibility that people with delicate
skin may suffer slight burns even at low tem-
peratures if they use the seat heater for a long
period of time. When using the heater, always
be sure to warn the persons concerned.
Do not put anything on the seat which insu-
lates against heat, such as a blanket, cushion,
or similar items. This may cause the seat heater
to overheat.
UB1093BB
NOTE
Use of the seat heater for a long period of time
while the engine is not running can cause battery
discharge.