Subaru 2006 Baja Owner's Manual page 276

locked to prevent the vehicle from rolling freely.
When you park the vehicle, first set the parking brake
fully, then shift into the "P" position. Do not hold the ve-
hicle with only the transmission.
A shift interlock function is employed in the automatic
transmission system to ensure safe starting of the ve-
hicle.
To shift the selector lever from the "P" to any other po-
sition, you have to depress the brake pedal fully then
push the release button on the selector lever when the
ignition switch is in the "ON" position. This prevents
the vehicle from lurching when it is started.
If the shift lever does not move from the "P" position
with the brake pedal depressed, the release button
pushed in, and the ignition switch in the ON position,
refer to the "Shift lock release" section in this chapter.
R (Reverse)
This position is for backing the vehicle.
To shift from the "N" to "R" position, first stop the vehi-
cle completely then move the lever to the "R" position
while pressing the release button.
N (Neutral)
Do not drive the vehicle with the selector lever
in the "N" (neutral) position. Engine braking
has no effect in this condition and the risk of an
accident is consequently increased.
This position is for restarting a stalled engine.
In this position the wheels and transmission are not
locked. In this position, the transmission is neutral; the
vehicle will roll freely, even on the slightest incline un-
less the parking brake or foot brake is on.
Avoid coasting with the transmission neutral.
During coasting, there is no engine braking effect.
NOTE
If the selector lever is in the "N" position when you
stop the engine for parking, you may not subse-
quently be able to move it to the "R" and "P" posi-
tions. If this happens, turn the ignition switch to
the "ON" position. You will then be able to move
the selector lever to the "P" position.
D (Drive)
This position is for normal driving.
Starting and operating
– CONTINUED –
7-23