Ac Adapter; Moving The Scanner - Canon imageFORMULA DR-C225 II User Manual


Avoid installing the scanner near equipment that generates a
magnetic field (e.g. speakers, televisions, or radios.)

AC Adapter


Connect only to a power outlet of the rated voltage and power supply
frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your
region).

Do not connect other electrical equipment to the same power outlet to
which the scanner is connected. Also, when using an extension cord,
make sure that the extension cord is rated for the current
requirements of the scanner.

Never try to take the AC adapter apart or modify it in any way, as this
is dangerous.

The power cord may become damaged if it is often stepped on or if
heavy objects are placed on it.

Do not use the power cord while it is coiled.

Do not pull directly on the power cord. When disconnecting the power
cord, grasp the plug and remove it from the outlet.

Keep the area around the power cord clear of objects so that the
power cord can be disconnected easily in an emergency.

Do not use an AC adapter other than the one provided with the
scanner. Do not use the AC adapter provided with the scanner with
other products.

If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.

Moving the Scanner


When moving the scanner, always hold it with both hands to avoid
dropping it.

Make sure to disconnect the interface cable and AC adapter before
moving the scanner. If the scanner is transported with these items
connected, the plugs and connectors may be damaged.
11