IBM Power775 Service Procedure page 81

15. Review the FDT status screen and ensure that the following conditions are true:
• Tool Mode:
• Error Status: NONE – OK. Check Tank Level.
Tank Level: Upper Half, Lower Half or Empty– OK. Check Pressure Test
•
Power775 Disk Enclosure Chassis Service Procedure
----Appendix A: DE Pressure Test Procedure ----
Ready – OK. Check Error Status.
WARNING – click the Decode Error Status button, record the
information returned and check Tank Level.
CRITICAL – click the Decode Error Status button, record the
information returned and contact next level of support.
Calibration.
Full – action required.
Page 81 of 171
Sample FDT Status