IBM Power775 Service Procedure page 64

STEP 61 Remove winch from transfer cart and attach to lift tool.
Disengage the winch from the transfer cart and insert into the lift tool slots (see Figure 60).
STEP 62 Reattach the guide rails to transfer the cart by using the 5 mm Hex tool P/N 74Y0986, Ratchet
handle P/N 6428240, Extension (18") P/N 46K2707 (all shipped in the Hand Tool Kit) to tighten
the captive fasteners and attach the rails (see Figure 57).
STEP 63 Winch new DE onto the Lift Tool.
Power775 Disk Enclosure Chassis Service Procedure
Figure 59 Transfer cart coupled to lift tool
Figure 60 Winch tool anchor slots
Page 64 of 171