Appendix A: Power775 Disk Enclosure (De) Pressure Test Procedure; Safety Notices - IBM Power775 Service Procedure

5 5 5 5 APPENDIX A: POWER775 DISK ENCLOSURE
(DE) PRESSURE TEST PROCEDURE
5.1

Safety Notices

Read "Safety Notices" available from InfoCenter:
http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/topic/p7hdx/G229-9054.pdf
The following cautions apply to all Power775 service procedures:
CAUTION:
Energy hazard present and Shorting might result in system outage and possible physical injury.
Remove all metallic jewelry before servicing. (C001)
CAUTION:
The doors and covers to the product are to be closed at all times except for service by trained service
personnel. All covers must be replaced and doors locked at the conclusion of the service operation.
(C013)
CAUTION:
Servicing of this product or unit is to be performed by trained service personnel only. (C032)
The following notices specifically pertain to this Power775 service procedure.
CAUTION:
The water-based coolant solution may contain an additive intended to inhibit corrosion
(or provide other functions). The solution may cause irritation to the skin or eyes. Avoid direct
contact with the solution. Employ appropriate Personal Protective Equipment when performing
operations involving the coolant or which may potentially expose you to the coolant. Refer to the
MSDS for more information. (C037)
CAUTION:
This unit must not be left running unattended, service personnel should always be
overseeing the process. (C038)
DANGER:
Hazardous voltage present. Voltages present constitute a shock hazard, which can cause
severe injury or death. (L004)
CAUTION:
Protective eyewear is needed for the procedure. (L011)
Power775 Disk Enclosure Chassis Service Procedure
----Appendix A: DE Pressure Test Procedure ----
Page 74 of 171