Refi T And Check Window, Install Window Baffl E - Valor 650JLN Owner's Manual

Refi t and Check Window, Install Window
Baffl e
1. Slide the window inside the appliance case and rest
it on the fi rebox front bottom tabs. Refi t the bottom
two bolts. The bolts should be screwed in securely.
2. Refi t the top two bolts securing by turning them
through 90 degrees.
3. Hook the window baffl e to the top of the window
frame. Be careful not to hook it onto the fi rebox
frame—see images below.
Window Baffl e
Rear view detail—window assembly with window
baffl e hooked on frame
(appliance shown without its front frame and baffl es for clarity)
Installation
fi rebox
frame
window
frame
4. Grab the top of the window and baffl e and pull them
forward and release to check that the window opens
slightly and returns confi rming the good function of
the spring-loaded mechanism.
5. Similarly check the bottom of the window by pulling
it forward and releasing.
IMPORTANT: To ensure a safe operation, ensure that
the spring-loaded mechanism functions properly.
6. Apply light hand pressure against the window frame
sides to bed in the window seal.
7. If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
window frame
window baffl e
Appliance front view
QUALIFIED
INSTALLER
Safety warning plate
cut out heat baffl e
(for clarity)
appliance top frame
window baffl e
39 39