Table of Contents
Advertisement
This appliance, as supplied, may ONLY be installed in an existing unal-
tered, functioning solid-fuel burning fi replace with a working fl ue and con-
structed of non-combustible material.
This appliance is APPROVED for installation into combustible type con-
struction only when using the 770ZCK Zero Clearance Kit (see separate
instructions packaged with the kit for details).
WARNING
!
Some materials or items, although
safe, may discolor, shrink, warp,
crack, peel, and so on because of
the heat produced by the fi replace.
Avoid placing candles, paintings,
photos, and other items sensitive to
heat around the fi replace.
WARNING
!
HOT HEARTH / FLOOR! The
hearth or fl oor in front of the
fi replace may become very hot
when the fi replace heats. Do not use
the hearth as a seat or shelf. Solid
wood fl ooring in front of the fi replace
(if allowed) may shrink during the
heating season due to heat.
Outer trim
(optional, sold separately)
Inner Front
(required, sold separately)
(optional, sold separately)
738 fi replace
Existing non-combustible
hearth
Overview
Fret
QUALIFIED
INSTALLER
Chimney Terminal Cap
Flashing
Approved 3" fl ex
chimney liner
running full length
Existing unaltered,
functioning solid-fuel
burning fi replace &
chimney
21
Advertisement
Table of Contents
