Table of Contents
Advertisement
Quick Links
Homeowner's Manual
G3 738
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings
exactly could result in serious
injury, death, or property damage.
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
▪
DANGER
4008734-01
▪
▪
▪
▪
Installation and service must be
performed by a qualified installer, service
agency or the gas supplier.
Hot glass
will cause burns.
Do not touch glass
until cooled.
Never allow children
to touch glass.
Gravity Vent
Insert Gas Fireplaces
natural gas 738KN
propane gas 738KP
Do not touch any electrical switch; do
not use any phone in your building.
Leave the building immediately.
Immediately call your gas supplier from
a neighbor's phone. Follow the gas
supplier's instructions.
If you cannot reach your gas supplier,
call the fire department.
A barrier designed to reduce
the risk of burns from the hot
viewing glass is provided with this
appliance and must be installed for
the protection of children and
other at-risk individuals.
Advertisement
Table of Contents
Related Manuals for Valor G3 738
Summary of Contents for Valor G3 738
- Page 1 Homeowner’s Manual G3 738 Gravity Vent Insert Gas Fireplaces natural gas 738KN propane gas 738KP Do not touch any electrical switch; do ▪ WARNING: not use any phone in your building. FIRE OR EXPLOSION HAZARD Leave the building immediately. ▪...
- Page 2 Ltd. reserves the right to change or modify any information or specifications without notice. Miles Industries Ltd. grants no warranty, implied or stated, for the installation or maintenance of your heater, Valor Fireplaces and assumes no responsibility for any consequential 190–2255 Dollarton Highway damage(s).
-
Page 3: Table Of Contents
fireplace, do not try to repair the unit yourself. Your Valor Fireplace Contents Here are some important details about your Valor Safety and your fi replace .......... 4 fireplace, should you need to contact your dealer. Child safety and your fi replace ......... 6... -
Page 4: Safety And Your Fireplace
Read and understand all instructions carefully before operating your fi replace. Failure to follow these instructions may result in possible fi re hazard and will void the warranty. Replacement manuals are available by contacting Valor Customer Service at 1-800-468-2567, or by visiting valorfi... - Page 5 Safety and your fireplace Glass window Intended use • This appliance is designed and approved as a supple- mental heater and provides the potential for most WARNING energy conservation when used while attended. The Do not operate this appliance with the use of an alternate primary heat source is advisable.
-
Page 6: Child Safety And Your Fireplace
Read and carefully follow all safety warnings and operating instructions contained in this manual, and follow these important child safety precautions and recommendations: • Parts of your Valor Fireplace become extremely A physical barrier is recommended if there are hot while in operation. The glass window tempera- at-risk individuals in the house. -
Page 7: Getting Started
It must be left with the fireplace when you are Valor safety gas shut-off done. For your safety, Valor fireplaces are fitted with a flame supervision device which will shut-off the gas supply if, for any reason, the pilot flame goes out. -
Page 8: Parts Of Your Fireplace
Parts of your fireplace Here are the major components of your installed fireplace, with the protective barrier installed. Your individual fireplace may appear differently depending on your model and installed options. Barrier Screen Window Front/Trim Liners Fuel Bed Logs, embers, pebbles Fret or Access Panel Bolts—Top of Window Window Frame... -
Page 9: Operating Your Fireplace
fireplace - see page 7 to learn how to access it. Control such as temperature or program Also, a copy of this card is reproduced in Appendix A settings, see Appendix A–Remote Control of the Installation Manual. Operation on page 21 of this manual or visit valorfireplaces.com/remotes... -
Page 10: Preventing Inadvertent Ignition
fireplace will not turn on automatic shut-off mechanism which is activated unexpectedly. in certain conditions. See Remote Control Operation at Appendix A or valorfireplaces.com/remotes for a description of this feature. WARNING Risk of severe burns! Surface of the fi... -
Page 11: Replacing Batteries
Replacing batteries To replace the batteries in the battery holder: WARNING 1. Unhook the barrier screen. 2. Unhook the fret or open bottom access panel. The Do not attempt to access the batteries battery holder is at right or left of the gas valve. while the fi... -
Page 12: Annual Service And Maintenance
Annual service and maintenance We recommend having your fi replace serviced before initial use, and at least once per year by a qualifi ed service technician. Contact your dealer quoting the model serial number, if possible. It will be helpful if the fi replace’s serial number can also be quoted. -
Page 13: Cleaning Your Fireplace
Cleaning your fireplace WARNING Risk of severe burns! Surfaces of the fi replace are very hot during operation. Ensure fi replace has cooled off before touching it. Remove the window for cleaning 1. Unhook the trim with barrier screen. 2. Locate the four spring-loaded bolts at the top and bottom of the window. - Page 14 Follow all instructions on the bottle/container. Log position is important in your Valor fi replace because it can optimize the beauty of the fl ame and • Our dealers have experienced good results from the the combustion effi...
- Page 15 Cleaning your fireplace Refi t and Check Window 1. To refi t the window, place the window against the fi rebox’s opening frame. Ensure that the wider part of the window frame is at the bottom. The top is marked TOP. Bottom of window (wider frame)
-
Page 16: Checking Pilot And Burner Flames
Checking pilot and burner flames Typical fl ame appearance The pilot light and burner flames should be checked periodically. Check after the fire has been on for at least 30 minutes. The pilot flame must cover the tip of the thermocouple probe. The main burner flame pattern will vary depending on the type of installation and climatic conditions. -
Page 17: Frequently Asked Questions
If the fireplace still won't turn on after that, call your dealer for further information. Your fireplace may require service by a qualified service technician. Visit valorfireplaces.com/contact for a list of dealers near you. I've just started my fi replace When operating your fireplace for the first time, some vapors may... - Page 18 Where can I purchase parts Any of our Valor dealers are able to order parts or provide field service. for my fi replace? Please contact your dealer - see page 3 - or visit valorfireplaces.com/ contact for a list of dealers near you.
-
Page 19: Valor ® Warranty
Installation and maintenance must be performed by 5. No Other Warranty an authorized and trained dealer in accordance with All obligations to repair this unit are de ned in this warranty. -
Page 20: Valor ® Outdoor Installation Warranty
The Company does not allow anyone to extend, b) Installation and maintenance must be performed alter or modify this warranty and assumes no... -
Page 21: Appendix A-Remote Control Operation
Appendix A–Remote Control Operation Radio Frequency Turn Fireplace ON 315 MHz for USA and Canada. Press buttons until you hear a short beep; release buttons. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Beeping continues until pilot is lit. - Page 22 Appendix A–Remote Control Operation Setting ºC/24-hr or ºF/12-hr clock Manual Mode M A N In MAN mode, press and hold Manual ame height adjustment. buttons until temperature / clock display changes from Daytime Temperature Mode TEMP When pilot is lit, room temperature °F / 12-hour °C / 24-hour is measured and compared to set...
- Page 23 Appendix A–Remote Control Operation Setting high / low Temperatures Setting Program Timers Setting “DAYTIME” high temperature. You can program two periods of time between 12 am and 11:50 pm in each 24-hour cycle. Default Settings: 23 °C/74 °F TEMP Programs P1 and P2 must be set in the following order Press SET to scroll to TEMP during a 24-hour cycle:...
- Page 24 Appendix A–Remote Control Operation Setting P2 high and low temperature times. Repeat same steps as Setting P1. When all settings are complete, press to save them. Timer Programming Example (default temperatures shown) 6:00 am 8:00 am 4:00 pm 10:00 pm 6:00 am high temp low temp...