Table of Contents
Advertisement
OWNER'S
INFORMATION
Lighting Instructions Plate
The Lighting Instructions are located on a card attached to your fi replace. See Locating Fireplace & Lighting
Information Card on page 6.
FOR YOUR SAFETY, READ BEFORE LIGHTING
WARNING
: If you do not follow these instructions exactly
causing property damage, personal injury or loss of life.
save gas, turn the pilot off when not using the appliance for a prolonged period of time.
AT TO DO IF
1.
2. T
ANY
•
W
3. AUTOMATIC IGNITION:
• ON/OFF wall switch (1) in ON position,
On the remote control handset, press the OFF button (red dot) and large flame
•
• Further short acoustic signals indicate the ignition process is in progress.
• When the pilot is lit, the Flame
• Press the small flame button (
4. M
IGNITION:
locate the pilot (fig. 3) inside of the firebox.
• Set Flame
• Push down the metallic core (4) with a pen or similar instrument; this will establish the pilot gas flow.
•
• Continue holding down metal core (4) for about 10 seconds; after release, pilot should remain lit.
•
service technician or gas supplier.
•
1. AUTOMA
T-OFF (using the remote control handset):
•
Press and hold the
•
Press "OFF" button (red dot) on remote handset to shut-off the
8
Operating Your Fireplace
r.
GAS
r's phone. Follow the gas supplier's instructions.
r
LIGHTING INSTRUCTIONS
)
) on the remote control handset to reduce the flame height
(Fig. 2). With the window off,
TO TURN OFF GAS TO APPLIANCE
(small flame)
ur building.
r
emote handset (1).
r
smell gas, go to the next step.
Adjustment
ms the start has begun.
).
n the remote control handset to adjust the flame height.
. To
ce technician to inspect
been under water.
T
tting
1
OFF
5
Fig 3
) or down (
)
ow;
Advertisement
Table of Contents
