Award BIOS Setup
Save and Exit Setup
After you have made changes under Setup, press <<Esc>> to return to the main
menu. Move cursor to Save and Exit Setup or press F10 and then press Y to
change the CMOS Setup. If you did not change anything, press <<Esc>> again
or move cursor to Exit Without Saving and press Y to retain the Setup settings.
The following message will appear at the center of the screen to allow you to
save data to CMOS and exit the setup utility: SAVE to CMOS and EXIT (Y/N)?
Exit Without Saving
If you select this feature, the following message will appear at the center of the
screen to allow you to exit the setup utility without saving CMOS modifications:
Quit Without Saving (Y/N)?
NOTE : Default values of the various Setup items on this chapter may not
necessarily be the same ones shown on your screen.
59