Terex Genie S-80 J Operator's Manual page 65

First Edition • First Printing
Observe and Obey:

Only qualified riggers should rig the machine.

Only certified crane operators should lift the
machine and only in accordance with the
applicable crane regulations.

Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial label for
the machine weight.
1 - X Axis
2 - Y Axis
Part No. 1306265GT
Transport and Lifting Instructions
Lifting Instructions
Fully lower and retract the boom. Fully lower the
jib.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Center of gravity
S-80 J
S-80 J Trax
-80 J • S
® ®
S -80 J TraX
X Axis
87 in
2.21 m
84 in
2.13 m
™
Operator's Manual
Y Axis
52 in
1.32 m
52 in
1.32 m
63