Page 1
Operator's Manual Supplement Lift Tools Access Deck ANSI/CSA North America South America Asia Original Instructions First Edition Fourth Printing Part No. 1292178GT...
Page 3
First Edition • Fourth Printing Operator's Manual Supplement Introduction Model Serial Number Approved Models (6 ft) S®-120 HD from S120D-1705 Model Serial Number SX™-105 XC from SX105D-174 S®-40/45 from S4016H-22550 SX™-135 XC from SX135H-127 S®-40/45 XC from S40XCH-101 SX™-125 XC from SX125D-101 S®-40/45 TRAX from S4016H-22550...
Page 4
First Edition • Fourth Printing Operator's Manual Supplement Introduction Model Serial Number Approved Models (8 ft) S®-120 HD from S120HD14D-201 Model Serial Number SX™-105 XC from SX105D-174 S®-40/45 from S40-001 SX™-135 XC from SX135H-101 S®-40/45 XC from S40XCH-101 SX™-125 XC from SX125D-101 S®-40/45 TRAX from S40-001...
Page 5
First Edition • Fourth Printing Operator's Manual Supplement Introduction Genie Self-propelled Booms may be used Genie Self-propelled Boom to lift under the following guidelines: Products and Lift Tools Access The owner/employer/user/operator of the Deck Guidance boom is responsible for providing fall Boom-supported Elevating Work Platforms are protection for boom operator.
Page 6
Owner/Employer/User/Operator equipment owner, employer, user and operator Requirements: hereby agree to indemnify and hold harmless Terex USA and its parent and affiliated companies Owner/Employer/User/Operator against any and all liabilities, claims, suits, losses, Requirements: costs and legal fees caused by, arising out of, or...
Page 7
First Edition • Fourth Printing Operator's Manual Supplement Introduction The Access Deck can only be used on Genie Boom-Supported Elevating Work Platforms equipped with the following 6 ft and 8 ft platforms: Side entry swing gate platforms with 2 sliding mid-rails.
Page 8
First Edition • Fourth Printing Operator's Manual Supplement Introduction Lift Tools™ Access Deck Using the Access Deck with the options below will result in Safety death or serious injury. Read, understand and obey all warnings and The Access Deck cannot be properly installed on instructions provided with the Access Deck.
First Edition • Fourth Printing Operator's Manual Supplement Introduction Symbol and Hazard Pictorials Pre-operation Inspection Definitions Be sure that the operator’s manual, safety manual, responsibilities manual and any The Access Deck necessary supplements are complete, legible weighs: and in the storage container located in the 8 ft: 36 lbs/16 kg platform.
Page 10
First Edition • Fourth Printing Operator's Manual Supplement Introduction Decal Inspection Use the inspection to verify that all decals are legible and in place. Decals may vary depending on machine configuration. 8 foot Access Deck Part No. Decal Description 1281174GT Decal, Lanyard , fall arrest/fall restraint 1292288GT Decal, Max Capacity, Word, Access Deck (8ft) 1292288FRGT...
First Edition • Fourth Printing Operator's Manual Supplement Operating Instructions Operati ng Instr ucti ons Lift Tools™ Access Deck Operation Annual Inspection Verify the Access Deck installation instructions Inspect for missing or loose components. have been followed properly and that the Check all fasteners are properly tightened.
First Edition • Fourth Printing Operator's Manual Supplement Installation Instructions Installation Ins tructi ons Contents of Kit 1293700GT (6 ft/1.8 m Platform) Description Genie part number Qty. (1) Manual, Supplement 1292178GT (2) Decal, Maximum Capacity, 1293709GT Word Observe and Obey: (3) Decal, Maximum Capacity, 1293709FRGT Word (FR)
Page 13
First Edition • Fourth Printing Operator's Manual Supplement Installation Instructions Deck Installation Contents of Kit 1291798GT (8 ft/2.4 m Platform) Note: The deck assembly can only be installed on the mid-rails of the platform. Description Genie part number Qty. Slide the right side of the deck assembly so it (1) Manual, Supplement 1292178GT is fully seated against the mid-rail of the...
Page 14
First Edition • Fourth Printing Operator's Manual Supplement Installation Instructions Handle Installation Note: Handle assembly must be mounted and accessible near the Access Deck anytime the Access Deck is mounted. Mount the handle assembly to the platform railing using both the U-bolts and 3/8- 16 nylock flange nuts.