Terex Genie S-80 J Operator's Manual page 57

First Edition • First Printing
Machine Not Level Indicator Light (if
equipped)
Machine On Incline indicator light
is on: The light is on and the tilt
alarm sounds when the machine
exceeds the tilt sensor activation
settings. Follow the appropriate
procedure below and move the
machine to a firm, level surface.
If the tilt alarm sounds with the
platform uphill:
1 Lower the boom.
2 Retract the boom.
If the tilt alarm sounds with the
platform downhill:
1 Retract the boom.
2 Lower the boom.
Part No. 1306265GT
Operating Instructions
Platform Overload Indicator Light
Machine Malfunction Indicator Light
1 Push in and then pull out the red Emergency
Stop button.
2 Lower and retract the boom.
3 Tag the machine and remove from service.
Functions will not operate.
-80 J • S ™
® ®
S -80 J TraX
Operator's Manual
Light flashing indicates the platform
is overloaded. The engine will stop
and no functions will operate.
Remove weight from the platform
until the light goes off and then
restart the engine.
Light on indicates a system fault.
55