Terex Genie S-80 J Operator's Manual page 22

Operator's Manual
Work Area Safety
Do not transport tools and materials unless they
are evenly distributed and can be safely handled
by person(s) in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.
Be sure the tires are in good condition and the lug
nuts tightened.
20
Do not place or attach
fixed or overhanging loads
to any part of this
machine.
Do not place ladders or
scaffolds in the platform or
against any part of this
machine.
-80 J • S
®
S
Operation on Slopes Hazards
Do not drive the machine on a slope that exceeds
the maximum uphill, downhill or side slope rating
of the machine. Slope rating applies only to
machines in the stowed position.
Maximum slope rating, stowed position, 4WD
Platform downhill
Platform uphill
Side slope
Note: Slope rating is subject to ground conditions
with one person in the platform and adequate
traction. Additional platform weight may reduce
slope rating. See Driving on a Slope in the
Operating Instructions section.
Note: When side slope exceeds 17% / 10°, the
turntable rotate function in one or both directions
will be disabled. Drive the machine to level ground
to restore turntable functions.
™
®
-80 J TraX
First Edition • First Printing
45% (24°)
20% (11°)
20% (11°)
Part No. 1306265GT