Terex Genie S-80 J Operator's Manual page 45

First Edition • First Printing
Test the Lift/Drive Select Function (if
equipped)
66 Start the engine.
67 Press down the foot switch.
68 Move the drive control handle off center and
activate a boom function control handle.
Result: No boom functions should operate.
The machine will move in the direction
indicated on the control panel.
Part No. 1306265GT
Test the Contact Alarm (if equipped)
69 Do not activate the foot switch and press on
the contact alarm cable to release the actuator
from the switch socket.
Result: The contact alarm lights will not flash
and the machine horn will not sound.
70 Activate the foot switch by pressing the foot
switch down.
Result: The contact alarm lights will flash and
the machine horn will sound.
71 Insert the actuator into the switch socket.
Result: The lights and horn will turn off.
72 Activate the foot switch by pressing the foot
switch down and press on the contact alarm
cable to release the actuator from the switch
socket.
Result: The contact alarm lights will flash and
the machine horn will sound.
73 Operate each machine function.
Result: All machine functions should not
operate.
74 Insert the actuator into the switch socket.
Result: The lights and horn will turn off.
75 Operate each machine function.
Result: All machine functions should operate.
a actuator
b contact alarm cable
c flashing alarm
d switch socket
-80 J • S ™
® ®
S -80 J TraX
Operator's Manual
Inspections
43