Terex Genie S-80 J Operator's Manual page 30

Operator's Manual
Controls
Ground Control Panel
1 Function enable button
Press and hold the function enable button to
enable the functions on the ground control
panel to operate.
2 Boom down button
Press the boom down button and the boom
will lower.
3 Boom retract button
Press the boom retract button and the boom
will retract.
4 Auxiliary power button
Use auxiliary power if the primary power
source (engine) fails.
Simultaneously hold the auxiliary power button
and activate the desired function.
5 Boom up button
Press the boom up button and the boom will
raise.
6 Boom extend button
Press the boom extend button and the boom
will extend.
7 LCD readout screen navigation buttons
28
8 LCD readout screen
Screen displays hour meter, voltage, oil
pressure and coolant temperature. Screen
also displays fault codes and other service
information.
9 LCD screen menu buttons
Use the LCD screen menu buttons to access
different menus.
10 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions and turn the
engine off. Pull out the red Emergency Stop
button to the on position to operate the
machine.
-80 J • S ™
® ®
S -80 J TraX
First Edition • First Printing
The Home button will show the
model, hour meter and access to
engine gauges.
The Maintenance button will show
the maintenance interval screen.
Light on indicates a service interval
has lapsed.
The Fault button will show current
faults and allow access to fault
logs. Light on indicates an active
fault condition.
The Setup button allows service
personnel to access configuration
screens.
Part No. 1306265GT