Terex Genie S-80 J Operator's Manual page 62

Operator's Manual
Operating Instructions
Installation of Padding
1 Install the 2 pieces of padding on the platform
rails. Position the padding to protect the
panels from contact with the platform rails.
Installation of Strap
1 Open the clamp and install it around a vertical
platform rail tube.
2 Insert a bolt with a washer through one side of
the clamp.
3 Install the strap assembly end plate onto the
bolt.
4 Insert the bolt through the other side of the
clamp.
5 Secure with a washer and a nut. Do not over-
tighten. The strap assembly end plate should
be able to slide on the platform rail.
Panel Cradle Operation
1 Secure both panel cradles to the platform.
2 Place the load so that it rests in both panel
cradles.
3 Center the load on the platform.
4 Secure the load to the platform using the
strap. Tighten the strap.
60
-80 J • S ™
® ®
S -80 J TraX
First Edition • First Printing
Part No. 1306265GT