Terex Genie S-80 J Operator's Manual page 54

Operator's Manual
Operating Instructions
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to the
on position.
The engine glow plugs will automatically start
when the machine is turned on.
3 When the glow plugs turn off, start the engine.
To Position Platform
1 Push and hold the function
enable button.
2 Push the appropriate function button according
to the markings on the control panel.
Drive and steer functions are not available from
the ground controls.
Platform Overload Indicator Light
Light flashing indicates the platform is overloaded.
The engine will stop and no functions will operate.
Remove weight from the platform until the light
goes off and then restart the engine.
Note: An alarm will sound at the platform when an
overload condition occurs and will stop sounding
when weight is removed from the platform.
52
Operation from Platform
1 Turn the key switch to platform control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
The engine glow plugs will automatically start
when the machine is turned on.
3 When the glow plugs turn off, start the engine.
Do not press down the foot switch when
starting the engine.
To Position Platform
1 Press down the foot switch.
2 Slowly move the appropriate function control
handle or toggle switch or press the
appropriate button according to the markings
on the control panel.
To Steer
1 Press down the foot switch.
2 Slowly move the drive control handle in the
direction indicated by blue or yellow triangles
OR press the thumb rocker switch located on
top of the drive control handle.
Use the color-coded direction arrows on the
platform controls and the drive chassis to identify
the direction the wheels will turn.
-80 J • S ™
® ®
S -80 J TraX
First Edition • First Printing
Part No. 1306265GT