Terex Genie S-80 J Operator's Manual page 35

First Edition • First Printing
13 Dual axis proportional control handle for drive
and steer functions.
OR
Proportional control handle for drive function
and thumb rocker for steer function.
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Move the control handle
in the direction indicated by the blue triangle
and the machine will steer to the left. Move the
control handle in the direction indicated by the
yellow triangle and the machine will steer to
the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Press the left side of the
thumb rocker and the machine will steer to the
left. Press the right side of the thumb rocker
and the machine will steer to the right.
14 Drive enable indicator light
Light flashing indicates that the boom has
moved just past either non-steer wheel and
drive function has been interrupted.
Part No. 1306265GT
15 Drive enable switch
To drive when the drive enable light is
flashing, hold the drive enable switch to either
side and slowly move the drive control handle
off center. Be aware that the machine may
move in the opposite direction that the drive
and steer controls are moved.
16 Drive speed select switch
Machine on incline symbol: Low range
operation for inclines.
Machine on level surface symbol: High range
operation for maximum drive speed.
17 Not used
18 Auxiliary power switch
Use auxiliary power if the primary power
source (engine) fails.
Simultaneously hold the auxiliary power switch
to either side and activate the desired function.
19 Engine RPM select switch
Move the engine RPM select switch to the
turtle position to activate low idle. Move the
engine RPM speed select switch to the rabbit
position to activate high idle.
20 Engine start switch
Move the engine start switch to either side to
start the engine.
21 Not used
-80 J • S ™
® ®
S -80 J TraX
Operator's Manual
Controls
33