Terex Genie S-80 J Operator's Manual page 27

First Edition • First Printing
Welder Safety
Read, understand and obey all warnings and
instructions provided with the welding power unit.
Do not connect weld leads or cables unless the
welding power unit is turned off at the platform
controls.
Do not operate unless the weld cables are
properly connected and the welder is properly
grounded.
The weight of the welder will reduce the rated
platform capacity and must be factored into the
total platform load. The welder power supply
weighs 75 lbs/34 kg.
Do not operate the welder unless a fire
extinguisher is immediately available for instant
use, per OSHA regulation 1926.352(d).
Part No. 1306265GT
Lockout After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is
between the non-steer wheels, or non-steer
tracks.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
-80 J • S ™
® ®
S -80 J TraX
Operator's Manual
Work Area Safety
25