112: Card Hopper Empty; 114: Cover Opened During Job; 150: Print While Unlocked; 151: Failed To Lock - Entrust CD820 User Reference Manual

CD820 Instant Issuance System
Common LCD Messages (cont.)

112: Card hopper empty

Cause: The printer did not detect cards in the input hopper.
1. Add cards to the input hopper.
2. Press the User button to clear the message.
Refer to "Load Cards" on page 8

114: Cover opened during job

Cause: The printer cover was opened while printing.
1. Check all printer doors to make sure that they are closed completely.
Press down on the cover ridges to make sure that the cover latches completely
on both sides.
2. Make sure that all doors are locked.
3. Press the User button to clear the message.
Refer to "Close the Printer Doors" on page 16

150: Print while unlocked

Cause: The printer is unlocked.
The card will be canceled.
Make sure that all access doors are closed and locked securely.
Refer to "Close the Printer Doors" on page 16

151: Failed to lock

Cause: An attempt to lock the printer failed.
The card will be canceled.
1. Make sure that all access doors are closed securely.
2. Try locking the printer again.
Make sure that the reject tray is installed properly before locking the printer.
Refer to "Empty the Reject Card Tray" on page 15
on page 16 for more information.
6
for more information.
for more information.
for more information.
and "Close the Printer Doors"