Mainboard User's Manual
Running the Setup Utility
Each time your computer starts, before the operating system loads,
a message appears on the screen that prompts you to "Press
<DEL> to enter SETUP". When you see this message, press the
Delete key and the Main menu page of the Setup Utility appears on
your monitor.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Esc : Quit
F9: Menu in BIOS
F10 : Save & Exit Setup
Listed below are explanations of the keys displayed at the bottom
of the screens:
Key
Function
Esc
Escape key: Exits the current menu
Cursor keys: Scroll through the items on a menu
Plus, minus, Page Up and Page Down keys:
+//PU/
Modify the selected field's values
PD
F10
F10 key: Saves the current configuration and exits
setup
F1
F1 key: Displays a screen that explains all key
functions
F5
F5 key: Loads previously saved values to CMOS
F6
F6 key: Loads a fail-safe configuration for the
normal system.
F7
F7 key: Loads an optimum set of values for peak
performance
24
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Time, Date, Hard Disk Type . . .
: Select Item