Table of Contents
Advertisement
Install the Mainboard
Install the mainboard in a system chassis (case). The board is an
Micro ATX size mainboard with a twin-tier of I/O ports. Ensure
that your case has an I/O cover plate that matches the ports on this
mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
PANEL1
Connect the power connector from the power supply to the ATX1
connector on the mainboard.
If there is a cooling fan installed in the system chassis, connect the
cable from the cooling fan to the PWRFAN1 fan power connector
on the mainboard.
Connect the case switches and indicator LEDs to the PANEL1
switch and LED connector header. See the illustration below for a
guide to the header pin assignments.
Green LED
Pins 13-14
Power LED
Pins 2-4-6
2
1
HDD LED
Speaker
Pins 15-16
Pins 1-3-5-7
2: Mainboard Installation
ATX1
PWRFAN1
Reset Switch
Pins 17-18
Power Button
Pins 21-22
22
21
Suspend LED
Pins 19-20
15
Advertisement
Table of Contents
