Table of Contents
Advertisement
Mainboard User's Manual
Frequency/Voltage Control Page
This page sets some of the parameters for the Frequency/Voltages
of this mainboard.
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Host/PCI Clock
CPU Clock Ratio
CPU clock failed reset
: Move
Enter : Select
F5:Previous Values
Auto Detect DIMM/
When this item is enabled, BIOS will disabled the
clock signal of free DIMM and PCI slots.
PCI Clk
Spread Spectrum
Eables or disables the spread spectrum for the
installed processor.
CPU Host/PCI
This item appears if you have set the CPU Internal
Core Speed to Manual. Use the CPU/DIMM/PCI
Clock
Clock to set the frontside bus frequency for the
installed processor (usually 133 MHz, 100 MHz or
66 MHz). Then use CPU Clock Ratio to set a
multiple.
CPU Clock Ratio
Use this item to select a multiplier for the system
frontside bus (FSB) frequency. The value of the
multiplier must be set so that:
Multiplier x Frontside Bus Frequency = CPU Clock
Speed
For example, if you have a processor that is rated
to run at 450 MHz and the system is running a
frontside bus frequency of 100 MHz, you should
select a multiplier of 4.5 so that:
4.5 (Multiplier) x 100 MHz (frontside bus) = 450
MHz (CPU clock).
40
Frequency/Voltage Control
Enabled
Disabled
Default
Auto
Disabled
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
