Table of Contents
Advertisement
CPU Clock failed
When this item is enabled and the system crashes
three times because the processor has been
reset
overclocked, the BIOS will automatically adjust the
speed of the processor to the system bus speed
multiplied by two.
Load Fail-Safe Defaults
If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of fail-safe
default values. These defaults place no great demands on the
system and are generally stable. If your system is not functioning
correctly, try installing the fail-safe defaults as a first step in
getting your system working properly again. If you only want to
install fail-safe defaults for a specific option, select and display that
option, and then press <F6>.
Load Optimized Defaults
If you select this item and press Enter, a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of optimized
default values. These default values place demands on the system
that may be greater than the performance level of the components,
such as the CPU and the memory. You can cause fatal errors or
instability if you install the optimized defaults when your hardware
does not support them. If you only want to install setup defaults for
a specific option, select and display that option, and then press
<F7>.
Set Supervisor and User Password
These items can be used to install a password. A Supervisor
password takes precedence over a User password, and the
Supervisor can limit the activities of a User. To install a password,
follow these steps:
1. Highlight the item Set Supervisor/User Password on the main
menu and press <Enter>.
2. The password dialog box appears.
3: BIOS Setup Utility
41
Advertisement
Table of Contents
