ABB ECA06 Configuration And Installation page 94

3.6 Setting the Configuration
This function can be used to select one input out of four or one input out of two
to be used as the output. When using two inputs the LSB input is used to select the
one to be copied to the output. When using four inputs both the LSB input and the
MSB input are used to make the selection. The function is summarised in the table
below.
False
False
True
True
Table 52
Signal1
Signal2
Signal3
Signal4
LSB
MSB
Table 53
Value
Table 54
94
MSB
False
True
False
True
Select Function.
Name
Select Inputs.
Name
Select Outputs.
LSB
Signal1
Signal2
Signal3
Signal4
Inputs
Connection
Off, Analog
Off, Analog
Off, Analog
Off, Analog
Off, Digital
Off, Digital
Outputs
Analog signal
Chapter 3: Configuration
Value
Type
493-0736-11 (6-2)