ABB ECA06 Configuration And Installation page 111

Chapter 3: Configuration
Time Measurement
Available in
ECA06 ECA60 ECA600 EMA60
- - X X
The Time Measurement block measures the time that the input Signal has been
active. The block measures time with a resolution of one second. The elapsed time
is presented on the display in the form
The internal counter can be reset to zero by selecting Reset and pressing the OK
key.
When the block is active and selected from the Operator Option List the time is
shown on the controller display as below.
Figure 43
Table 73
Table 74
493-0736-11 (6-2)
Signal
Time Measurement Display.
Name
Signal
Time Measurement Inputs.
Name
Reset OK
Time Measurement Parameters.
Time
Measurement
hours : minutes : seconds.
FO1: Elapsed time
hhhh:mm:ss
Inputs
Off, Digital
Parameters
Setting
3.6 Setting the Configuration
Connection
Unit
None
111