Chapter 2: Installation
2
3
Figure 5
Removing the Cassette
Removal is the reverse of installation. Proceed as follows:
1
2
3
4
Figure 6
493-0736-11 (6-2)
Insert the lower retaining spring as shown in the figure below, holding the
cassette with your thumb and pressing the spring down with your index
finger or a screwdriver if necessary.
Repeat step 2 for the upper retaining spring.
Mounting the Retaining Springs.
Press the front part of the lower retaining spring back. If the mounting panel
is thick it may be necessary to use a screwdriver to do this.
Lever the retaining spring out.
Repeat steps 1 and 2 for the upper retaining spring.
Withdraw the cassette from the panel cutout.
Removing the Controller Unit.
2.2 Installation with Cassette
Click!
21