ABB ECA06 Configuration And Installation page 70

3.6 Setting the Configuration
MaxValue
MinValue
Figure 38
The Signal Range is the range of the signal available on the output of the block.
This range is
The default values of MinValue (0.0%) and MaxValue (100.0%) define the default
(signal) range
By adjusting MinValue and MaxValue, the user can limit the (signal) range to
positive values only (MinValue = 0.0%) or any other permissible range.
The Displayed Range is the range of the value presented on the display. This range
is
70
LoLimit
The relationship between Displayed Value and Signal Range.
MinValue ≤ Value ≤ MaxValue
LoLimit ≤ Displayed Value ≤ HiLimit
Displayed Value
–100.0% ≤ Value ≤ 100%
Chapter 3: Configuration
HiLimit
493-0736-11 (6-2)