Engine Coolant - Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual

II MAINTENANCE PROCEDURES
See an authorized Can-Am dealer, re-
pair shop or person of your own choos-
ing to check the performance of the
cooling system.

5) Engine Coolant

Engine Coolant Level Verification
WARNING
Check coolant level with engine
cold. Never add coolant in cooling
system when engine is hot.
Place vehicle on a level surface.
Remove the gauge support.
219001854-001_a
Step 1: Pull up
Step 2: Slide
Remove the coolant reservoir cap.
WARNING
Warning: Do not remove the
coolant reservoir cap if engine is
hot.
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir.
______________
140
vmo2012-012-042_a
1. Engine coolant reservoir
NOTE: When checking level at tem-
perature lower than 20°C (68°F), it may
be slightly lower than MIN. mark.
Add coolant up to MAX. mark if re-
quired.
Use a funnel to avoid spillage. Do not
overfill.
Properly reinstall and tighten reservoir
cap.
Reinstall gauge support.
219001854-001_b
Step 1: Hook
Step 2: Engage retaining tab
WARNING
In order to avoid potential burns,
do not remove the radiator c ap if
the engine is hot.
NOTE: A cooling system that fre-
quently requires coolant is the indica-
tion of leaks or engi ne problems. See
an authorized Can-Am dealer.