Maintenance Procedures; Air Filter - Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual

Table of Contents

Advertisement

II MAINTENANCE PROCEDURES
This section includes instructions for
basic maintenance procedures. If you
have the necessary mechanical skills
and the required tools, you can per-
form these procedures. If not, see
your authorized Can-Am dealer.
Other important items in the main-
tenance schedule that are more dif-
ficult and require in-depth technical
knowledge or special tools are best
performed by your authorized Can-Am
dealer.
WARNING
Unless otherwise indicated, al-
ways turn ignition switch to OFF
position and remove key before
performing any maintenance.
WARNING
Should removal of a locking de-
vice be required (e.g. lock tab,
self-locking fastener, etc.), always
replace it with a new one.

1) Air Filter

Air Filter Maintenance Guideline
As with any ATV, air filter maintenance
is critical to ensure proper engine per-
formance and life span.
Air filter maintenance should be ad-
justed according to riding conditions.
Air filter maintenance must be in-
creased in frequency and oil must be
added to the foam filter for the follow-
ing dusty conditions:
– Riding on dry sand.
– Riding on dry dirt covered surfaces.
– Riding on dry gravel trails or similar
conditions.
NOTE: Riding in a group in these con-
ditions would increase even more the
air filter maintenance. Refer to
FILTER CLEANING AND OILING
subsection for maintenance proce-
dure.
NOTE: An accessory pre-filter for
"dusty conditions" may be used. Con-
tact an authorized Can-Am dealer for
details.
Air Filter Removal
NOTICE
ify any component in the air filter
housing. Otherwise, engine perfor-
mance degradation or damage can
occur. The engine is calibrated to
operate specifically with these com-
ponents.
Remove seat.
Remove console.
Lift rear portion of console upwards
until the studs are released from the
grommets.
vmo2014-007-001_a
TYPICAL
1. Console
2. Studs and grommets
Pull console rearwards.
Rotate air filter cover counterclock-
wise to remove.
NOTE: A socket wrench may be used
to ease removal.
AIR
in this
______________
Never remove or mod-
133

Advertisement

Table of Contents
loading

Table of Contents