Radiator; Engine Coolant - Can-Am MAVERICK Sport MAX T Operator's Manual

MAINTENANCE PROCEDURES
vmr2006-008-001_a
1. Slightly oil
2. Slightly oil
NOTICE
Pay attention to avoid
pinching the O-ring during filter and
cover installation.
Install the cover on the engine.
Tighten oil filter cover screws to rec-
ommended specification.
TIGHTENING TORQUE
Oil filter cover
screws

Radiator

Radiator Inspection and Cleaning
Periodically check the radiator area for
cleanliness.
To access radiator, remove front grill by
pulling the bottom and sliding it down-
ward.
219001880-032_a
TYPICAL
______________
112
10 N•m ± 1 N•m
(89 lbf•in ± 9 lbf•in)
Inspect radiator and hoses for leaks or
any damage.
Inspect radiating fins. They must be
clean, free of mud, dirt, leaves and any
other deposit that would prevent the
radiator to cool properly.
If available, use a garden hose to rinse
the radiating fins.
CAUTION Never clean radiator
with your hands when it is hot. Let
the radiator cool down before clean-
ing.
NOTICE
Be careful not to damage
the radiating fins when cleaning. Do
not use any object/tool that could
damage the fins. When hosing, use
low pressure only. Never use a HIGH
PRESSURE washer.

Engine Coolant

Engine Coolant Level Verification
WARNING
Check coolant level with engine
cold.
1. Place vehicle on a level surface.
2. Remove the coolant tank access
cover.
219001880-033_a
TYPICAL
1. Coolant tank access cover