Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual page 94

I CONTROLS
The shift lever has 5 positions:
SHIFT LEVER POSITIONS
POSITION
P
R
N
H
L
sfvmo2014-012-036
SHIFT PATTERN
The vehicle must be stopped and
brakes applied prior to selecting any
gear.
NOTICE
This gearbox is not de-
signed to shift while vehicle is mov-
ing.
P: Park
The park position locks the gearbox to
help prevent vehicle movement.
WARNING
Always use the PARK (P) position
when the vehicle is not in oper-
ation. The vehicle can roll if t he
shift lever is not set to P (PARK).
R: Reverse
The reverse position allows the vehicle
to go backwards.
NOTE: In reverse operation, the en-
gine's RPM is limited, thus limiting the
vehicle reverse speed.
______________
92
GEAR
Park
Reverse
Neutral
High range (forward)
Low range (forward)
WARNING
When driving downhill in reverse,
gravity can increase the vehicle
speed above the set limited re-
verse speed.
Neutral
The neutral position disengages the
gearbox.
WARNING
Always use the PARK (P) position
when the vehicle is not in oper-
ation. The vehicle can roll if the
shift lever is set to N (NEUTRAL).
High Range (Forward)
This position selects the high speed
range of the gearbox. It is the normal
driving speed range. It allows the vehi-
cle to reach its maximum speed.
Low Range (Forward)
This position selects the low speed
range of the gearbox. It allows the ve-
hicle to move slowly with maximum
torque at the wheels.
NOTICE
Use the low speed range
to pull a trailer, carry heavy cargo,
go over obstacles or drive uphill and
downhill.