Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual page 55

Turning
Practice turning at low speeds before attempting to turn at faster speeds.
Keep both hands on handlebars and feet on foot pegs.
Maintain a constant speed or a slight acceleration during turn.
To reduce the risk of rollovers:
– Use care when turning.
• Do not turn the handlebar too far or too fast for your speed and environment.
Adjust steering inputs accordingly.
• Slow down before entering a turn. Avoid hard braking during a turn.
• Avoid sudden or hard acceleration when turning, even from a stop or low
speed.
– Never attempt donuts, skids, slides, fishtails, jumps, or other stunts. If vehicle
starts to skid or slide, steer in the direction of the skid or slide. Never slam the
brakes and lock the wheels.
– Avoid paved surfaces. This vehicle is not designed to operate on paved surfaces
and is more likely to roll over. If you must drive on pavement, turn gradually, go
slowly, and avoid abrupt acceleration and braking.
Avoid sudden inputs to steering, throttle or brakes while turning.
Do not attempt turns at excessive speed.
sfvmo2014-012-525
If you do get into a slide or skid, it may help to turn the handlebar in the direction of
the skid until you regain control. Never jam the brakes and lock the wheels.
Braking
Always keep both hands on handlebars and feet on foot pegs when braking.
________
WARNING
A) SAFETY INFORMATION
IV RIDING THE VEHICLE
_______
53