Roller Fairlead; Cargo Bed; Cargo Bed Tilt Release Handle; Anchoring Hooks - Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual

10) Roller Fairlead

The roller fairlead is used to prevent
damages to the vehicle and guide the
cable into the winch.
219001733-002_a
1. Winch
2. Roller fairlead
3. Winch hook
4. Hook strap

11) Cargo Bed

The vehicle is equipped with a 2
level inclinable cargo bed. The cargo
box/bed may be used for various types
of cargo.
WARNING
To reduce the risk of loss of con-
trol or loss of load, use the cargo
bed only in accordance with
ING LOADS AND DOING WORK
SAFETY INFORMATION
12) Cargo Bed Tilt Release
Handle
The latching mechanism of the C argo
bed can be actuated from right side of
the vehicle through a release handle.
To Tilt the Cargo Bed
Release the hairpin clip.
Pull Cargo bed release handle and on
same time lift edge of t he Cargo bed.
MOV-
in
.
______________
sfvmo2014-001-020_a
1. Cargo bed release handle
2. Hairpin clip
To Lower the Cargo Bed
To lower the Cargo bed, simply push it
down into place and secure with hair-
pin clip.

13) Anchoring Hooks

To provide anchoring point in order to
secure cargo inside the Cargo bed,
4 anchoring hooks are located inside
the cargo area.
14) Operator's Heated
Grips (If Equipped)
The heated grips have 4 levels of heat.
The heat level is indicated by LEDs
above the switch. No LED lit indicates
that the heated grips are off.
219001854-002_b
1. LED heat level
Press the switch once to turn on.
III EQUIPMENT
107