Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual page 155

219001868_014_a
TYPICAL - FRONT TURN SIGNAL LIGHT
1. Retaining screws
2. Replace the light bulb.
3. Reinstall the socket.
Front Position Light Replacement
NOTE: The front position lights cannot
be disassembled. They have to be re-
placed as a whole.
1. Disconnect the electrical connector.
2. Unscrew the retaining nut.
3. Remove the position light.
219001866-004_a
1. Position light
2. Retaining nut
4. Install the new position light in the
reverse order.
Licence Plate Lights Bulb
Replacement
1. Remove the licence plate bulb
cover.
219001870-001_a
2. Replace the bulb.
3. Reinstall the cover.
Taillight and Rear Turn Signal Bulb
Replacement
Unscrew screws securing taillight as-
sembly.
sfvmr2014-010-048
TYPICAL
1. Screws securing taillight assembly
Pull assembly out of its location.
Unplug connector from bulb.
Rotate light bulb counterclockwise to
remove it from taillight.
______________
II MAINTENANCE PROCEDURES
153