Footpegs; 12-Volt Power Outlet - Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual

III EQUIPMENT
Passenger's Seat Removal
1. To unlock latch, pull the passenger's
seat latch lever toward the front of
the seat.
219001923-022_b
1. Seat handle
2. While maintaining latch lever pulled
towards the front, apply downward
pressure on the back of latch lever
to clear rear latch from pin and tog-
gle seat towards front using back-
rest.
3. Pull seat rearward and up out of lo-
cation to clear the front tabs.
Passenger's Seat Installation
1. Install driver seat first.
2. Ensure the latch lever is in the open
position by pulling it towards the
front of seat.
3. Using a forward motion, insert both
front tabs of the seat into the vehicle
anchor housings.
4. Rotate downwards to engage the
rear latch.
5. Close the latch lever by pushing it
rearwards to secure seat in posi-
tion.
6. Check if the seat is firmly secured in
position before using it.
______________
102
WARNING
It is of the upmost importance for
the passenger's safety that you
confirm that the passenger's seat
is properly locked in position by
pulling back and up several times.

3) Footpegs

The footpegs are located on the RH
and LH footrests.
vmo2012-012-019_a
TYPICAL
1. LH footpeg
WARNING
Operator must have both feet on
footpegs at all time during vehicle
operation.

4) 12-Volt Power Outlet

Convenient for handheld spotlight or
other portable equipment.