Lh Handlebar Switches (If Equipped); 4Wd/6Wd And Driving Modes (If Equipped) Selector Switch - Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual

8) LH Handlebar Switches
(If Equipped)
219001854-002_a
1. Multifunction switch (see details in this
section)
2. Heated grips switch (see EQUIPMENT for
details)
3. Heated throttle lever switch (see
EQUIPMENT for details)
4. Winch switch (see EQUIPMENT for details)
9) 4WD/6WD and Driving
Modes (if equipped)
Selector Switch
The 4WD/6WD and Driving Modes se-
lector is located on the RH side of the
handlebar.
219001964-001_a
TYPICAL
1. 4WD/6WD Selector
2. 4WD position
3. 6WD position
4. Driving modes selector
This switch selects 4 wheel drive or 6
wheel drive mode when the vehicle is
stopped and the engine is running.
NOTICE
stopped to engage or disengage
4WD/6WD switch. Mechanical dam-
age may occur if switch is engaged
or disengaged while driving.
The 6WD mode is engaged when the
switch is pushed downwards.
219001964-001_b
6WD MODE - TYPICAL
The 4WD mode is engaged when the
switch is pushed upwards. The vehicle
is then rear wheel drive only.
219001964-001_c
4WD MODE - TYPICAL
This switch is used to select the driving
modes. (If equipped)
_______________
The vehicle
I CONTROLS
must be
93