Can-Am OUTLANDER 6x6 T 2021 Series Operator's Manual page 145

CAUTION Let exhaust system
cool down before proceeding with
cleaning and inspection.
Remove the muffler cover. Discard re-
taining screws.
NOTICE
Do not use impact tool for
any screw removal.
vmr2012-0005-050_a
TYPICAL
1. Screws
2. Cover
Remove and discard the tail pipe retain-
ing screws.
vmr2012-0005-051_a
TYPICAL
1. Screws
2. Tail pipe
Remove exhaust tail pipe, gasket (dis-
card) and spark arrester.
tmo2011-001-041_a
TYPICAL
1. Spark arrester
2. Gasket
3. Exhaust tail pipe
Remove carbon deposits from the
spark arrester using a brush.
NOTICE
careful to avoid damaging spark ar-
rester mesh.
CAUTION Wear eye protection
and gloves.
tmo2011-001-043_a
1. Clean spark arrester
Inspect mesh of spark arrester for any
damage. Replace as required.
NOTE: Spark arrester screen replace-
ment is required only when damaged.
Inspect spark arrester chamber in muf-
fler.
Clean any debris as required.
Install new gasket, tail pipe and new re-
taining screws.
______________
II MAINTENANCE PROCEDURES
Use a soft brush and be
143