Table of Contents
Advertisement
Technical Manual
1.
While the test is running the 'test animation' accompanied by a Test Started message
will be displayed.
2.
On completion of a successful test the screen returns to the Dispense Head screen. If
the dispense head fails to move a Moving Failed message is displayed and you are
asked to Continue, returning to the Dispense Head screen.
3.
Four test positions are available; Home, Vend Position 1, Vend Position 2 and Fully
Extended. (Home being the back position, this proves the micro switch operation)
5.5.8 Vend Without Cup
This menu enables the engineer to test vend all of the drinks that are available from the
machine without dropping a cup to ensure each drink is correctly dispensed.
A suitable container must be placed under the dispense position to receive the vend. While
the tests are running the 'test animation' accompanied by a Test Started message will be
displayed. On a successful completion of the test the screen returns to the Vend Without
Cup screen.
1.
Select the required drink to be tested.
2.
The ingredient, milk and sugar strengths can be changed using the – and + to change
the values as required.
3.
Select Start to start the vend process.
4.
Each drink can be tested as required by repeating the procedure above.
5.5.9 Vend With Cup: COTI
This menu enables the engineer to test vend all of the drinks that are available from the
machine into a cup, to ensure each drink and cups are correctly dispensed. While the tests
are running the 'test animation' accompanied by a Test Started message will be displayed.
On a successful completion of the test the screen returns to the Vend With Cup screen.
1.
Select the required drink to be tested.
2.
The ingredient, milk and sugar strengths can be changed using the – and + to change
the values as required.
63
Advertisement
Table of Contents
