Table of Contents
Advertisement
Technical Manual
more times. If these attempts fail the consumer's money is returned and the message "Out
of Cups" is displayed.
To clear the message and return to standby mode, open the door.
Note: you must check and if necessary clear the obstruction from cup drop unit and ensure
correct operation before leaving the machine.
5.7.16.2 Cup Mechanism
This enables the cup drop unit to be switched On or Off. If user's own cups are always to be
used, set this to Off to disable the cup drop unit. SureVend
the dispense area and will not dispense drinks without a cup in the dispense area.
5.7.16.3 Cup Station Sensor
This enables the cup in position sensor to be enabled or disabled
5.7.17 Brewer Waste Management
If this feature is On it enables the number of fresh brew drinks dispensed to be limited
before the brewer waste bucket is emptied ensuring the bucket does not overflow.
1.
Brewer Waste Management - check this box to enable.
2.
Brewer Waste Capacity - enter the number of vends before all fresh brew drinks are
disabled / removed from the menu.
3.
Current Waste Counter - this indicates the number of fresh brew drinks dispensed.
4.
Reset Waste – this resets the counter but only after a confirmation box is selected
Note: If this feature is turned on the operator must press button 12 on the Service Keypad
every time the brewer waste bucket is emptied.
Note: It is highly recommended that this feature is enabled on LINEA machines.
TM
can still be used to monitor
81
Advertisement
Table of Contents
