Technical Manual
Section 9 - Dispense Pipes
9.1 COTI machines
There are three sizes of pipe used of which 1 & 3 can be replaced by the Operator:
CoEx® Espresso Brewer = 4mm white silicone
Hot water = 8mm grey silicone
Mixing bowls = 6mm grey silicone
To replace pipes
1.
Open cabinet door and extend the delivery head by pressing 8 on the service keypad.
2.
Using the above information about pipe size, connect the pipes to the dispense head.
3.
The pipes should be cut to such lengths that when the head is in it's extended position
they are not too taut and the pipe doesn't sag below the delivery head
Note: Soup must always be connected to position 1 or 4
119