CPI COTI Technical Manual page 83

Technical Manual
This option allows the user to decide how they want to set the ingredient throws when
programming the machine, either by time or by volume.
Note: to set up or view using volume (g or ml) ALL the Canisters/Grinder and valves must
be calibrated as described in section 5.7.1.2
Select Time to program the throws in seconds.
Select View to view the throws in grams or millilitres
Note: this is option is chronologically based and only allows you to view the current
settings, when the ingredient is changed and it is recalibrated the values here will not be
changed.
Select Save to program the throws in grams or millilitres
Note: this option is volume based and when the ingredient is changed and it is recalibrated
the values here will be changed accordingly.
5.7.2 Nutrition Info
See section 4.14
5.7.3 Copy content from USB stick
See section 4.6
5.7.4 Remove content from machine
See section 4.8
5.7.5 Change product information
See section 4.9
5.7.6 Change Group Information
See section 5.3.3
5.7.7 Configure Generic Content
See section 4.10
5.7.8 Heater Tank Setup
This option enables the target water temperatures in the tank, the minimum temperature
for a drink to be set and displays the current tank temperature.
1. Minimum Vend Temperature—to set the minimum vend temperature.
2. Tank Temperature—to set the gravity tank temperature.
3. Current Tank Temperature—shows the current gravity tank temperature.
4. CoEx® Temperature—to set the espresso heater temperature.
5. Current CoEx® Temperature—shows the current espresso heater temperature.
(all ingredients and valves must have been be calibrated)
73