Table of Contents
Advertisement
7.
Take the new lower piston and cylinder assembly from
the service kit.
Before assembling the unit to the swing arms/filter holder
assembly, ensure that the lower piston (a) is at the top of its
stroke as shown in the photograph
9.
Holding the lower piston and cylinder assembly as
shown, guide the assembly into the swing arms/filter
holder assembly.
b
8.
Ensure that the piston drive cam (b) is positioned as
shown.
If necessary push the piston drive cam anti- clockwise
until it reaches its stop position.
c
10. Check and ensure that the lower piston guide block (c)
locates with the piston drive cam (d) as shown in the pho-
tograph.
d
130
a
1
Advertisement
Table of Contents
