Table of Contents
Advertisement
Technical Manual
5.11.15.1 Perform Configuration Clone
Select this option to display the screen below to select the elements to be cloned.
1.
Insert USB stick formatted with an atlas folder into socket USB 3 on the main controller
2.
Select the elements to be cloned.
3.
Select Clone comment, this displays a local keyboard and allows the clone to be named
for future reference.
4.
When complete select Create clone package.
Note: Your USB stick can hold multiple clone files simultaneously, hence the need to
identify each one very carefully.
5.11.15.2 Restore Configuration
Select this option to load a Clone configuration from a USB stick onto the machine.
Note: A clone can only be uploaded onto a machine operating on the same software and
configuration as the one the clone was taken from
1.
Insert the USB stick with the required Clone into socket USB 3 on the main controller.
2.
Select Restore Configuration and select the required file to load the Clone onto the
machine.
3.
When the copy process is complete a confirmation screen is displayed and the machine
will reboot.
5.11.16 Custom Configurations
This enables the configurations loaded via the Software Update menu (section 5.11.3) to be
selected and installed. Any configurations no longer required can be deleted from the
machine's memory.
97
Advertisement
Table of Contents
