CPI COTI Technical Manual page 61

Technical Manual
System Settings Page 2/4 (Section 5.11.9)
Language
DTS
Screen Brightness
Update Advertisements
Software Updates
Backup/Restore
Clone Settings
Custom Configurations
System Settings page 3/4 (Section 5.11.17)
Software Version
Temperature Units
Keyless Transitions
Standby Screen
Default Dispense Head
Position
Automatic Reboot Settings
Buzzer Settings
Debug Log Enable
System Settings page 4/4 (Section 5.11.25)
Display OOS Errors
LED Device Type
Main Menu page 2/2
Security Codes (Section 5.12)
enables individual languages to be set in both programming
and user modes
Data Transfer Standard, enables the method of data transfer
from the machine to a device to be specified
enables the brightness of the screen in both standard and
power save mode to be set
for future development
enables configurations to be loaded
enables a backup of the current configuration to be made or
restored
enables the current configuration to be copied to and re-
stored from a USB stick
pre-programmed configurations can be selected
displays details of the version currently installed
enables the selection of Celsius or Fahrenheit
enables Jug and Free vend via PIN codes
enables the machine to display a standby screen and to set a
time between the last vend and when the standby screen is
displayed
sets the position of the dispense head after a vend
enables the time of reboots to be changed
changes the sound when touch / capacitive screen is inter-
acted with
enables the capture of log files for fault analysis
if enabled will show the customer the errors
enables the selection of a LED colour scheme
enables access to the machine to be restricted, codes for
Engineer & Operator access, & Jug & Free Vend
51