Table of Contents
Advertisement
Engineer - this menu enables full access to the program to configure and run test
procedures within the machine. This is detailed fully in Section 5.
1.
Once access has been gained to the programming mode the screen displays the
programming Main Menu. Most subsequent menus follow the same format as this root
menu.
2.
In certain configuration menus the current value is displayed against the item.
3.
Navigation between multiple pages is via a Next page icon and to return to a higher
menu via a Up one level icon.
4.
Where a configuration parameter has been changed a Save icon maybe available to
save the setting and return to the previous screen.
3.5 Entering or Updating Parameters
There are various forms of screens to change the configuration parameters of the machine,
from Check Boxes, Radio Buttons to Value Increment and Value Entry.
3.5.1 Check boxes
These are used where there is a multiple selection of parameters available, in this example,
drink selections.
1.
Select the required options and a tick appears in the check box. Select again to remove
the tick.
2.
When all the required options have been made select the Up one Level icon to return
to the previous screen.
3.5.2 Radio Buttons
These are used to turn functions On/Off or to Enable/Disable them , where only one of a
multiple of selections can be selected. In this example to name the cold drink that is
available.
1.
Select the required option, to fill the radio button.
2.
When the required option has been made select the
Up one Level icon to return to the previous screen
18
Advertisement
Table of Contents
